| Type: | Backwash |
|---|---|
| Usage: | Chemical Industry, Pigment Filtration |
| Motive Force: | Electric power |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
[Filter status]
The liquid flows in from the inlet, and the scraper with compensation is attached to the outer surface of the filter in a
tangential manner. The liquid flows inward from the outer surface of the filter through the filter, the impurities are trapped on the outer surface, and the liquid flows out from the outlet; as time goes by, the impurities Gradually increase, the pressure difference rises, and the filter screen is cleaned according to the set pressure difference or regularly.
[Cleaning state]
The motor drives the scraper to perform a horizontal rotation to clean the filter screen. When the scraper rotates, the impurities are scraped (peeled off) by the scraper and flow along the filter screen to the bottom of the filter, and the impurities are deposited in the dirt collection chamber. Each cleaning consists of several strokes. After the surface of the filter screen is cleaned, the filtering capacity is restored. Normally filter during cleaning without interruption of flow.
[Sewage state]
After multiple cleaning cycles, the impurities have accumulated to a sufficient amount, and the drain valve is opened regularly to discharge the waste liquid with high concentration of impurities. If necessary, it can also be recycled.
|
Applicable liquid
|
Water and viscous liquid (<800000cps), impurity content <1000ppm
|
|
Filtration accuracy
|
50μm
|
|
Standard design pressure rating
|
1.OMPa, higher pressure can be customized
|
|
High design temperature
|
0-260ºC (depending on the seals)
|
|
Single filter area
|
0.14-1.45
|
|
Cleaning pressure difference
|
0.05MPa
|
|
Differential pressure transmitter
|
Differential pressure transmitter or differential pressure switch
|
|
Geared motor
|
180w, three-phase,380V protection grade lP55; worm gear reducer
|
|
lmport and export connection standards
|
Flange, HG20592-2009 (standard design), HG20615-2009 (compatible with ANSIB16.5)
|
|
Filter element type material
|
V-shaped wedge net, material 304/316L/2205/titanium
|
|
Shell wetted material
|
SS304/316L/2205/CS
|
|
Scraper material
|
Alloy steel/PTFE
|
|
Shell sealing material
|
NBR nitrile rubber(standard)fluorine rubber
|
|
Public supply requirements
|
Pneumatic ball valve, protection grade lP65
|
|
Public supply requirements
|
380V AC,0.4-0.6MPa clean and dry compressed air
|
1. who are we?
){kind=link}