High Quality 0.2 Micron PP Pes PVDF Pleated Filter Cartridges for Chemical Filtration

• Material: Glass Fiber, Nylon, Polypropylene, PTFE, PVDF, Pes
• Application: Industry, Food and Beverage, Medicine, Textile, Metallurgy, Water Treatment Industry
• Type: PP Filter
• Model NO.: CS-PP-02UM
• Filter Connector: 222 Fin/Flat 226 Fin/Flat DOE
• Filtration Grade: Medium Filter
• Activated Carbon Filter Type: Pes/PTFE/PVDF/PP/Nylon
• Removal Rating: Minimum 0.1um
• Diameter: 69mm
• Core/Support/End Cap Material: Polypropylene
• Seal Material: Silicone, EPDM, FKM, E-FKM
• Max. Operating Temperature: 80 Degree
• Customized: Support
• OEM: Support
• Transport Package: PE Bag+ Carton
• Specification: 5", 10", 20", 30", 40"etc
• Origin: China
• HS Code: 8421999090
• Production Capacity: 600000pieces/Year
• Package Size: 40.00cm * 30.00cm * 25.00cm
• Package Gross Weight: 6.000kg

Product Description

 

High Quality 0.2 Micron PP PES PVDF Pleated Filter Cartridges For Chemical Filtration




 

Product Overview
The microporous pleated filter adopts advanced filtration technology and is made of high-quality filtration media such as polypropylene thermal spray fiber membrane, nylon or polytetrafluoroethylene (PTFE) membrane, etc.It has many advantages such as small size, large filtration area, high filtration accuracy (ranging from 0.1 μ m to 60 μ m), low pressure difference, low cost, large flow rate, and long service life. It has wide chemical compatibility and can adapt to various complex chemical environments.


Installation steps
Preparation: Before installation, ensure that the installation environment is clean, free of debris and dust.
 Check if the filter and accessories are complete, and if the filter element is damaged.

Choose appropriate connectors: Based on actual usage needs, choose 222 universal connectors, 226 connectors, or flat connectors.Ensure that the joint is tightly connected to the pipeline without any risk of leakage.

Install filter element: Carefully open the filter housing and place the filter element in the correct direction inside the filter, being careful not to damage the filter element. Ensure that the filter element is securely installed and does not shake.

Connecting pipes: Connect the filter to the inlet and outlet pipes correctly, use appropriate sealing materials to ensure good sealing at the connection and prevent water leakage.
 

Maintenance and upkeep
Regular cleaning: Based on actual usage, regularly clean the filter to remove surface dirt and impurities.Clean with clean water or mild cleaning agents, but avoid using chemicals that can damage the filter element.

Filter cartridge replacement: When the pressure of the filter significantly increases or the filtering effect decreases, it should be considered to replace the filter cartridge.When replacing the filter element, follow the installation steps in reverse order.

Storage precautions: If the filter is not used for a long time, it should be cleaned and stored in a cool, dry place after drying, avoiding direct sunlight and humid environment.

 

Product Parameters

Materials Of Construction	Material	Polypropylene
	Micron	0.1, 0.2, 0.45, 0.65, 1.0, 2.0, 3.0, 5.0, 10, 30, 40, 50, 70, 100 μm
	Support Layers	Polypropylene
	Inner Core	Reinforced Polypropylene/Stainless Steel
	Outer Support	Polypropylene
	End Cap	Reinforced Polypropylene/Stainless Steel
	Seal Method	Thermal Bonded, No Adhesives
	O-rings/Gaskets	Silicone; Nitrile; EPDM; Te-flon; Vi-ton
Cartridge Dimensions	Cartridge Type	DOE(220), 222, 226, etc.
	Outer Diameter	69mm(2.75'')
	Inner Diameter	33mm(1.30'')
	Length	5''/10'' / 20'' / 30''/40''
	Filtration Area	0.65 m2 per 10''
Operating Conditions	Normal Operating Temperature	Up to 55ºC (131 ºF )
	Max. Operating Temperature	80ºC (176 ºF ) at △ P≤1.0 bar (14.5psi)
	Normal Flow Direction	4.2bar(60.9psi) at 25ºC (77°F)
	Reverse Flow Direction	2.1bar(30.5psi) at 25ºC (77°F)
	PH Value Compatibility	1-13
Cartridge Safety	Endotoxin	< 0.25 EU/ml
	Extractables	0.03g / 10"

 

Precautions
Strictly prohibit overpressure operation: Do not exceed the rated working pressure of the filter to avoid safety accidents.

Prevent damage to the filter element: During installation, disassembly, and use, be careful to avoid collision and squeezing of the filter element.

Pay attention to chemical compatibility: When filtering chemical liquids, ensure that the filter has good compatibility with the filtered chemical substances to avoid chemical reactions that may damage the filter.

 

More Custom Cases

  



 

Workshop Display

 

Company Profile

Qingdao Crowns Machinery Co., Ltd. is located in Huangdao District, on the west coast of Qingdao, Shandong Province, China. With over 10 years of expertise in designing and manufacturing a wide range of industrial filtration equipment, we are committed to providing comprehensive, high-quality filtration solutions. Our products have been exported to numerous countries worldwide, serving customers across various industries with reliable, one-stop filtration solution.


 

FAQ

Q1: Where is your factory located?
A1: Qingdao crowns machinery co.,ltd is located at Huangdao district ,Qingdao city, China
Q2: Are you an integrated supplier for filter equipment ?
A2: Yes, we can provide one-stop filtration solutions to customer according to customer's requirements.
Q3: How about the quality control in your factory?
A3: Production strictly according to CE / ISO standards. All our machines will be tested before packaging.
Q4: Will you offer the pre-sales service?
A4: Yes, we have an experienced pre-sales team to support customers not only the technology but the solution.
Q5: What's your payment terms?
A5: For small orders: 100% T/T in advance. For large orders: 30% T/T deposit 70% T/T balance before shipping.
Q6: What is the delivery time of the product?
A6: Actually, the delivery time of the machines is depended on the machine options. Normally, the delivery time of standard machine could be within 10-30 days
Q7 : What is the warranty of the product ?
A7: All products, except for consumables, come with a one-year warranty.
Q8 : Can we use our own design?
A8: Yes, OEM/ODM supporting. Just tell us your requirements.