Product Description
Under the influence of pressure,The liquid into the interior of the filter, Impurities are trapped on the filter element, The filtrate flows through the filter core to achieved the purpose of filtration.
This generally occurs after multi-media pretreatment filtration, before reverse osmosis, ultrafiltration, etc. membrane filtration equipment. It is used to filter out fine substances (such as tiny quartz sand, activated carbon particles, etc.), bacteria and other impurities filtered by the multi-media.
The working principle is Mechanical filtration using different precision pores of the filter element. all contaminants can be trapped in the filter cartridges surface and in the pores because of the flow direction.
As the filtration time increases, the filter element is contaminated by impurities.The running resistance increases, and when the operating pressure difference between the inlet and outlet water reaches 0.1 MPA, the filter element should be replaced.
| Working pressure: |
0.6 / 1.0 / 1.6Mpa |
| Body Material: |
Stainless steel (SUS304, SUS304L, SUS316, SUS316L). |
| Operating temperature: |
5 ~ 40 ºC (exceed 60 ºC to be informed) |
| Design temperature: |
5 ºC -100 ºC |
| Replace the pressure: |
0.05Mpa-0.07MPA |
| Filter interface: |
flat compression, plug-in |
| Cylinder and base connection mode: |
quick opening, flanged |
| Seal type: |
O-ring or flat washer |
| Seal Material: |
PTFE, rubber. |
| Sealing material: |
nitrile rubber, silicone,standard configuration for the silicone seal. |
| Flange Standard: |
GB, HG, SH, HGJ, JB, ANSL, JIS and other standards. (User-specified, please indicate the pressure level) |
| Manufacturing, testing standard: |
GB150 standard, or user-specified criteria. |
Detailed Photos
FAQ
1. who are we?
We are based in Shandong, China, start from 2018,sell to North America(20.00%),Africa(10.00%),Northern Europe(10.00%),Mid East(10.00%),South America(10.00%),Domestic Market(5.00%),South Asia(5.00%),Southern Europe(5.00%),Southeast Asia(5.00%),Central America(5.00%),Western Europe(5.00%),Eastern Asia(5.00%),Eastern Europe(5.00%). There are total about - people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
){kind=link}